Dynamix DW 2 FXO Instrukcja Użytkownika Pobierz pdf (Strona 184)

usr/config$ ifaddr -sntp 1 10.1.1.1

While 10.1.1.1 stands for SNTP server’s IP address.

-ipchange If the unit is behind the IP sharing device and the IP address

for the WAN port of that IP sharing is using the dynamic IP

address. This function has to be enabled.

usr/config$ ifaddr –ipchange 1

-id This id is for the user name of the PPPoE usage.

-pwd This password is for the user name of the PPPoE usage.

-reboot If the connection disconnected by the ISP, the unit will reboot and

get the ip again.

4.2.8 [time]

When SNTP function of FXO GateWay is enabled and SNTP server can

be found as well, type time command to show current network time.

usr/config$ time

Current time is THU JUL 01 11:46:01 2004

Please make sure about that the SNTP server was configured before you

used this command.

4.2.9 [ping]

Use ping to test whether a specific IP is reachable or not.

For example: if 192.168.1.2 is not existing while 210.63.15.32 exists. Users

will have the following results:

usr/config$ ping 210.54.23.129

Please contact with your vendor before you are using the ipsharing and

ipchange function.

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 216 217

Brak uwag

Dynamix DW 2 FXO Instrukcja Użytkownika Strona 184